[SOLVED] Xilinx ISE IP core error; what can I do when core does not exist in current version?

Hi,
when I try to simulate a code which has a fifo core in it I get this error:


I don't have the previous version of ISE; what can I do?

You can download this version from Xilinx website, can't you?

Or regenerate the FIFO with the Xilinx version you do have...

r.b.

pbernardi said:

You can download this version from Xilinx website, can't you?

Click to expand...

You are very wise! :lol: Considering my internet connection speed which is a 256Kbps (shared with 5 other users) and costs 6$ per mounth and considering that the ISE is about 4GB, it takes almost 35 hours for me to download it, of course if the connection does not lose. Thank you for your very helpful comment.

Or regenerate the FIFO with the Xilinx version you do have...

Click to expand...

Can you please tell me what exactly should I do?
First I clock Implementation radio button then I double clock on Regenerate Cores . but I still get that ERROR.

Is it really impossible to use a core generated in previous versions of ISE in newer versions?

I would start from scratch and build a FIFO in Coregen that has the same functionality as the one which is not working. If you have all of the original files, the .xco file has a list of all of the Coregen options that were used to build the FIFO, and the original RTL file for the FIFO will confirm the features and port widths etc. With that info, it only takes a few minutes in Coregen to build a duplicate of your old FIFO.

Yes, it can be impossible to use old cores, especially if the old one was generated with a version of fifo_generator that had bugs or was not optimal.

r.b

Fractional-N said:

You are very wise! :lol: Considering my internet connection speed which is a 256Kbps (shared with 5 other users) and costs 6$ per mounth and considering that the ISE is about 4GB, it takes almost 35 hours for me to download it, of course if the connection does not lose. Thank you for your very helpful comment.

Click to expand...

If you started the download at the moment of your first post, it would be done by now. ;-)

Is it really impossible to use a core generated in previous versions of ISE in newer versions?

Click to expand...

Nope, it's possibe. But there have been very interesting side effects in the past, so I wouldn't recommend it. Unless of course you have some free time to go hunt down interesting problems. So if you don't have a solution at this point in time I'd suggest you start that < 2 days download now with a download manager. At least that way if after some mucking about it still doesn't work, at least you will have an alternative solution. And the mucking about being grab the .xco file and see if you can regenerate the core in your current version. Sometimes works, sometimes doesn't, depends a bit on the core.

OMG! :sad:
thanks guys