shmick
Newbie level 1
Let me start by saying that I'm a noob with regards to electronics, but I tend to be a quick learner.
Anyways, I saw the wireless relay control with xbee video and was looking to build something along these lines.
The project is to create a remote microphone A/B switcher.
One side would have an xbee with a normally open push button switch and 2 LEDs (red and green)
The other side would have an xbee that controls a 3PDT relay. 2 of the poles are for audio wire #2 and audio wire #3 and the 3rd pole would be for the relay to report it's status ie: Open (Mode A) or Closed (Mode B). The 3rd pole would be wired back to the xbee so that it can send the status back to first xbee which would then triggger either the Mode A (green) or Mode B (red) LED.
So, can anyone help me out with a schematic for doing this or advice for things I might be overlooking?
Thanks.
-- Steve
Anyways, I saw the wireless relay control with xbee video and was looking to build something along these lines.
The project is to create a remote microphone A/B switcher.
One side would have an xbee with a normally open push button switch and 2 LEDs (red and green)
The other side would have an xbee that controls a 3PDT relay. 2 of the poles are for audio wire #2 and audio wire #3 and the 3rd pole would be for the relay to report it's status ie: Open (Mode A) or Closed (Mode B). The 3rd pole would be wired back to the xbee so that it can send the status back to first xbee which would then triggger either the Mode A (green) or Mode B (red) LED.
So, can anyone help me out with a schematic for doing this or advice for things I might be overlooking?
Thanks.
-- Steve