T
treez
Guest
Hi,
We wish to terminate this ribbon cable into a 10 way (two rows of 5) female connector, of 2.54mm pitch. This will plug into the male 10 way which is on the PCB.
Please assist us in finding part numbers for this task?
Also, we seek the crimp tool for this.
We already have this, but no-one knows the part numbers of the connectors for it, so we can't re-do them....problem is its not connecting properly, so we want to start again and re-do it. It seems like the connector just squeezes over the ribbon cable and its luck-of-the-draw whether you get a good connection or not.
Farnell 2628362 ribbon cable
This page shows the same ribbon cable
...and references "Speedbloc" IDC connectors, but googling "speedbloc" shows nothing....or leads to nothing
We wish to terminate this ribbon cable into a 10 way (two rows of 5) female connector, of 2.54mm pitch. This will plug into the male 10 way which is on the PCB.
Please assist us in finding part numbers for this task?
Also, we seek the crimp tool for this.
We already have this, but no-one knows the part numbers of the connectors for it, so we can't re-do them....problem is its not connecting properly, so we want to start again and re-do it. It seems like the connector just squeezes over the ribbon cable and its luck-of-the-draw whether you get a good connection or not.
Farnell 2628362 ribbon cable
--- Updated ---
This page shows the same ribbon cable
Last edited by a moderator: