Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Wireless Nwtwork Help (WiFi)

Status
Not open for further replies.

saeed_pk

Full Member level 4
Full Member level 4
Joined
May 20, 2006
Messages
237
Helped
35
Reputation
68
Reaction score
28
Trophy points
1,308
Location
Islamabad, Pakistan
Activity points
2,655
Dear All;
I want to esatblish a wireless network between two locations 350 meters apart
@ Location 'A' i have two PC's and a DSL connection all wired through LAN
@ Location B I have three PC's wired through a LAN but no internet

i want to connect Location A and B as people at both locations can use internet

please tell me what do i require
wireless bridge
access point , gateway or router

range is not issue i can make some high gain antenna please tell me some low cost solution
 

First thing is WIFI has maximum range of 100 meters.
Second you should use wired backbone for that purpose.
For this purpose you have to use one AP and three repeaters for 100m each.
As shown below
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top