h_cet
Member level 4
- Joined
- Jan 25, 2006
- Messages
- 69
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,771
Dear Friends,
I would like to make a simulation of traweling wave line (see figure-1)... the wire is excited using horn antennas...
I would like to excite and terminate a wire in Feko thru the freq range of 900MHz - 2GHz... I can excite the wire but I cannot terminate wire properly... So my S11 parameters thru the freq range are almost 1.12 dB... It means that I cannot terminate the wire properly.... How can I do it? if you could help me I will be really glad...
figure-1 traveling wave line
figure-2 wire excitation
figure-3 s11
with my best regards...
Harun
I would like to make a simulation of traweling wave line (see figure-1)... the wire is excited using horn antennas...
I would like to excite and terminate a wire in Feko thru the freq range of 900MHz - 2GHz... I can excite the wire but I cannot terminate wire properly... So my S11 parameters thru the freq range are almost 1.12 dB... It means that I cannot terminate the wire properly.... How can I do it? if you could help me I will be really glad...
figure-1 traveling wave line
figure-2 wire excitation
figure-3 s11
with my best regards...
Harun