WIRE-BOARD CONNECTOR shearch

[tahtouh]

hello

can any one knwo a rigth angle connector or a cable can be used to connect this:

https://fr.farnell.com/fci/73547-12...1788318?dimVals=210160451+210171665+210180230

thank's

 

[SHABU]

Hi tahtouh,

check this..

http://portal.fciconnect.com/portal/page/portal/fciconnect/ecatalog?appname=catDisplayStyle$domProductQueryName=87022-625TRLF*$OP=search

Shabu.

 

[tahtouh]

Hi tahtouh,

check this..

http://portal.fciconnect.com/portal/page/portal/fciconnect/ecatalog?appname=catDisplayStyle$domProductQueryName=87022-625TRLF*$OP=search

Shabu.

thank u, but are there a wrigth angle one§??

 

[SHABU]

No.. the link i gave was an vertical one. It is one of the mating connector for the connector link you gave....

 

[tahtouh]

so,
can i use **broken link removed**

in a board and via to connect it to the other board, if no are there a connector that i can use like this

 

[SHABU]

so,
can i use **broken link removed**

in a board and via to connect it to the other board, if no are there a connector that i can use like this

You cannot use this part for https://fr.farnell.com/fci/73547-12...1788318?dimVals=210160451+210171665+210180230

Shabu

 

[tahtouh]

You cannot use this part for https://fr.farnell.com/fci/73547-12...1788318?dimVals=210160451+210171665+210180230

Shabu

can i use this **broken link removed** for??

- - - Updated - - -

i want to connect two board without using a connector in one of them,

are there a solution,

i want use a small connector in the other board with 50 pin (if there is litil much then 50, no problem), and a pitch <1.27

thank u

- - - Updated - - -

i want to connect two board without using a connector in one of them,

are there a solution,

i want use a small connector in the other board with 50 pin (if there is litil much then 50, no problem), and a pitch <1.27

thank u

- - - Updated - - -

a conector like those of PCIe