tendi
Member level 5
- Joined
- Jan 26, 2006
- Messages
- 86
- Helped
- 8
- Reputation
- 16
- Reaction score
- 7
- Trophy points
- 1,288
- Location
- zimbabwe
- Activity points
- 1,851
Hi everyone,
I have a stator core with these physical details: core length is 140mm; Back-iron is 30mm; internal diameter is 225mm; external diameter is 255mm; tooth 9mm wide; number of slots is 48; The rotor is a skewed type. Now the problem is that the winding data has been lost. So I am looking for info to rewind it to a 400v 50Hz 25HP 4pole 3phase motor. The original nameplate says: 500/550v, 26A delta, 4pole D180M frame. The data required should include wire size, number of turns for the coils, coil pitch etc.
Thanks...
I have a stator core with these physical details: core length is 140mm; Back-iron is 30mm; internal diameter is 225mm; external diameter is 255mm; tooth 9mm wide; number of slots is 48; The rotor is a skewed type. Now the problem is that the winding data has been lost. So I am looking for info to rewind it to a 400v 50Hz 25HP 4pole 3phase motor. The original nameplate says: 500/550v, 26A delta, 4pole D180M frame. The data required should include wire size, number of turns for the coils, coil pitch etc.
Thanks...