Wimax Handover Project in Matlab

[ronaknr]

handover matlab

I need a help regarding my MS thesis. I have read few papers on Wimax Handover.And decided to work on wimax handover. But still i am not getting any idea on which specific topic i should work. Also i dont know how to use matlab. I have to learn it as well. Also want to know can we do wimax handover related work in Matlab? Please help me as i have short time. Thanks in advance.

 

[Communications_Engineer]

wimax project

you can try a handover using stateflow

create physical channels that are involved in handover then use Stateflow for the logical part of the handover processing. We can discuss it more if you want

 

[ronaknr]

thesis in handovers

Thanks a lot. So far i have read these 4 research papers:
Hossam Fattah - A New Handover Mechanism for IEEE 802.16e Wireless Networks
Mohamad Salhani - Performance of WiMAX Networks Using Horizontal Handover with Channel Reservation Mechanism
Paul Boone - Strategies for fast scanning and handovers in WiMAX-802.16
Wenhua Jiao - Fast Handover Scheme for Real-Time Applications in Mobile WiMAX
and this one is introductory Paper:
Pouya Taaghol - Seamless Integration of Mobile WiMAX in 3GPP Networks

I was thinking if i can work on handover between wimax and GSM. Let suppose user of Gsm reaches an area where there is no coverage area of GSM.Means no BTS..At that time it should switch to the WImax BTS, thats in its boundry range.

I dont know how well is this idea..and if i can be able to implement it..as i dont have any idea yet how to start it..
ANother idea i have is to do handover within wimax. For that i dont have some better idea..like there is already lot work on this..like time fast hadnover etc parameters...
I need some guidance in this matter..

I dont have any idea of creating physical channels and stateflow..Can you please elobrate it? Thanks again

 

[Communications_Engineer]

matlab project for handoff

Physical channel is just like using a random bernoulli data source or you can specify your self what to send. Of course you would have CRC, Interleaving, Modulation etc this would be different if you are using Traffic channels and Signalling channels. Now a way to use Statefow is through Simulink so you will have to design a simulink model. Try to see the following posts on mathworks.com


1) power control (there are 2 at mathworks.com but choose the one which has stateflow)

2) Mobile call processing

I'll try to help you whenever I find the time in between. Keep me posted at my email address

 

[ronaknr]

gsm handover research topics

Thanks.
You mean below link regarding power control. But its on IS-95A CDMA
https://www.mathworks.com/matlabcentral/fileexchange/746

or this link?
https://www.mathworks.com/matlabcentral/fileexchange/18802

Do i have to start with power control? The idea i presented to you...can you please tell me how much time it will take. I got short time period of 2 months.

This link regarding call processing IS-95A
https://www.mathworks.com/matlabcentral/fileexchange/787

Basically i dont get the knot from where i have to start. Thats the problem i am facing.

 

[reham84]

dear all
please i need a souce of matlab or Qual net simulator as am making a master in handover in mobile wimax and i need to make simulation to Handover techniques so please help me

 

[tel_engr]

dear Communications_Engineer, i am doing i similar kind or project and have no one who have handon on simulink .I got the model of wifi from matlab central whoch calculate the tx power using VAR but i m not understanding how is it returning VAR . Could u help me in this regard? or anyone else?