Width DRC error in Eagle

Status
Not open for further replies.
D

DimaKilani

Member level 1
Joined
Jan 23, 2014
Messages
39
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,648
Hello,

I'm using eagle to design a PCB. In the layout, I got a width error. The trace width is 0.1mm and the minimum width is set to 0.005mm. I'm wondering where does this error come from?

I created another dummy layout and I use the same DRC setting as in the previous one and it has no error. Any explanation for that?!

Thanks.

Dima
 

Hi,

This is only a vague description. Impossible to reproduce it.

Maybe show us: .brd, .erc, .drc files
Or a screenshot with the error description and the error position and layer.

Klaus
 



I attached the photos. The first one where I have no trace routing and there is no error. The second photo is when I route, it gives me an error although the trace width>0.005mm as shown in the third photo. Now, i tried to increase the trace width to 0.3mm and the number of errors is reduced from 5 to 4 as shown in the 4th photo.

Please, advise.
 

You may be looking for the wrong DRC rules. Do you have additional width rules for net classes in effect?
 

You are right. I didn't know that I need to look at the net classes. The default minimum width was 0.3mm so that is why when I increased the trace width to 0.3mm the error was removed. It makes sense now. Thank you very much for your help. Appreciated!
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…