Aug 19, 2007 #1 U uchi Newbie level 4 Joined Jul 4, 2007 Messages 5 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,314 hi im doing a simulation in simulink of wimax can any1 tell me the snr range to use. im using qam64, qam16, qpsk as the modulation scheme and in the awgn block wht c/n should i use snr or Eb\No thnks
hi im doing a simulation in simulink of wimax can any1 tell me the snr range to use. im using qam64, qam16, qpsk as the modulation scheme and in the awgn block wht c/n should i use snr or Eb\No thnks
Aug 20, 2007 #2 I iTdl Member level 3 Joined Jul 25, 2005 Messages 59 Helped 8 Reputation 16 Reaction score 3 Trophy points 1,288 Activity points 1,740 For snr ranges for testing, if your are following standard refer to section 8.4.13 which tells about the requirements for snr. If you are using awgn block from matlab, use snr .
For snr ranges for testing, if your are following standard refer to section 8.4.13 which tells about the requirements for snr. If you are using awgn block from matlab, use snr .