Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

who can give me npn model of hsipce,i have only pnp model

Status
Not open for further replies.
Re: who can give me npn model of hsipce,i have only pnp mode

this is the NPN 2N2222 i hope it help You




.model Q2N2222 NPN(Is=14.34f Xti=3 Eg=1.11 Vaf=74.03 Bf=255.9 Ne=1.307
+ Ise=14.34f Ikf=.2847 Xtb=1.5 Br=6.092 Nc=2 Isc=0 Ikr=0 Rc=1
+ Cjc=7.306p Mjc=.3416 Vjc=.75 Fc=.5 Cje=22.01p Mje=.377 Vje=.75
+ Tr=46.91n Tf=411.1p Itf=.6 Vtf=1.7 Xtf=3 Rb=10)
* National pid=19 case=TO18
* 88-09-07 bam creation
incol said:

:lol: Tony Coimbra-PT
 

Re: who can give me npn model of hsipce,i have only pnp mode

TonyCoimbra said:
this is the NPN 2N2222 i hope it help You




.model Q2N2222 NPN(Is=14.34f Xti=3 Eg=1.11 Vaf=74.03 Bf=255.9 Ne=1.307
+ Ise=14.34f Ikf=.2847 Xtb=1.5 Br=6.092 Nc=2 Isc=0 Ikr=0 Rc=1
+ Cjc=7.306p Mjc=.3416 Vjc=.75 Fc=.5 Cje=22.01p Mje=.377 Vje=.75
+ Tr=46.91n Tf=411.1p Itf=.6 Vtf=1.7 Xtf=3 Rb=10)
* National pid=19 case=TO18
* 88-09-07 bam creation
incol said:

:lol: Tony Coimbra-PT




but how to make a npn model with this program,thanks
 

Re: who can give me npn model of hsipce,i have only pnp mode

I think you can include it in your hspice netlist , or put it in your hspice model file.Use the model name in your circuit netlist npn.
 

Re: who can give me npn model of hsipce,i have only pnp mode

check this

bipolar model from italian university. click on downloads on LHS on the page
 

I think there is no npn model can be used in hspice
 

Re: who can give me npn model of hsipce,i have only pnp mode

Could u please elaborate on what u ment by "I think there is no npn model can be used in hspice"
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top