Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

which V to use as V reference input to comparator

Status
Not open for further replies.
T

time_search

Junior Member level 3
Junior Member level 3
Joined
Feb 22, 2010
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
jordan
Activity points
1,454
hi all... i am building the SPWM circuit on PSPICE ...i need a help which part or element to choose as Vinput(Vcontrol) to enter to the comparator at the positive side...and what parameters or values( amplitudes) to choose for this Vcontrol signal with frequency=50 HZ...knowing that i built the Vtri signal....could anyone help me in that please and if there is any ready schematic on PSPICE for this SPWM that i can directly use it in my work, that will be really so great...thanx alot
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top