which circuit can replace bulk capacitor in power line ?

Status
Not open for further replies.
S

Siddharth_saxena

Junior Member level 1
Joined
Nov 11, 2021
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
107
i was using 2 bulk capacitor to avoid the condition when the supply voltage goes down 4V my lin ic is stop working but it take a lot of space so i want to avoid them is there any circuit which can solve my problem , i was thinking about the boost converter but that is going a bit costly.
 

Sort by date Sort by votes
Hi,

your information:
* two capacitors (of unknown calue)
* "goes down 4V" ... whatever that means.

If you want good and fast answers, provide complete informations first. Schematic, voltages (input, output, drop...), currents, part values, timing... all that is related to your problem.

Klaus
 

Upvote 0 Downvote
Know of no other solutions then the ones you listed, either a capacitor or a boost-converter.

Do you have a Schottky diode in series with the capacitors to prevent them being discharged by the 4V source when it drops?
 

Upvote 0 Downvote
A "circuit" capable of holding up that line under load-test will
need its own power source, and active elements. Probably not
a "win". Certainly not compared to the cost of a suitable
capacitor. Unless the supply is already there, underutilized,
and for free.
 

Upvote 0 Downvote
It’s STILL incomplete information. Are you saying the voltage drops to 4.3 V in 20ms from some other, undefined level? Or, the 4.3V is removed for 20ms, and you need to keep it from dropping to 4V? Or the voltage drops 4V? Or something else?

You’re just wasting everybody’s time when you post teeny bits of information, a little at a time, and then expect everyone to know what on earth you are talking about.
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…