Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

where the power gone small white LED based lamp

Status
Not open for further replies.
V

vicky.pace

Member level 1
Member level 1
Joined
May 5, 2008
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,537
small based lamps

Dear all,

Here I have made a small white LED based lamp in which I have used a .39uF400v poly capacitor for droping voltage. All 10 LEDs are in series and glowing very well but what I am seeing that input current is equal to output current mean input power is 220X.02=4.4W and output 32X.02=.64W. Now the question is that where the power 4.4-.64=3.76W is going even there is no heat in circuit.
Please clear this funda if anyone knows.

Thanks
Vikram
 

Re: where the power gone????????

Measure the input power with consideration to the phase angle between voltage and current. The real power is V x I x Cosine of the phase angle between the first two.
 

The input power to the circuit is mainly apparent power.
 

yes you giving bad power factor there.

A million amps in quadrature with a million volts means no real power dissipated
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top