jiunjeong
Newbie level 1
- Joined
- Aug 28, 2011
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,287
I want to measure param respectively for monte, when simulating tran + monte.
For Example,
.tran 10p 1u sweep monte=100
.meas tran t_delay TRIG v(IN) VAL=0.6 TD=0 rise=1 TARG v(OUT) VAL=0.6 TD=0 fall=1
above meas statement, I want to define delay param respectively for each monte (monte=1,2,3,4 ....),
such as t_delay1=~~, t_delay2=~~. .....
The reason why I want to make statement to calculate delay's standard deviation.
I'm sorry I can't use good English.
Please, answer my question.
Thanks, !!
For Example,
.tran 10p 1u sweep monte=100
.meas tran t_delay TRIG v(IN) VAL=0.6 TD=0 rise=1 TARG v(OUT) VAL=0.6 TD=0 fall=1
above meas statement, I want to define delay param respectively for each monte (monte=1,2,3,4 ....),
such as t_delay1=~~, t_delay2=~~. .....
The reason why I want to make statement to calculate delay's standard deviation.
I'm sorry I can't use good English.
Please, answer my question.
Thanks, !!