Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

When report_noise with PT, why display the slave with positive?

Status
Not open for further replies.
xuexianwang@maxwavemicro.

xuexianwang@maxwavemicro.

Newbie
Newbie level 1
Joined
Jul 28, 2022
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
When I report the noise in Primetime, the column in Slack just show "positive", not the detailed slack value showed, why?

Code: 
noise_region: above_low
 pin name (net name)       width    height     slack
 -----------------------------------------------------
 U2274/A1 (n1853)
 Aggressors:
 lat_rdat                   0.21      0.04
 N_36_IO_BUFF              10.83      0.00
 n1844                     10.69      0.00
 n1852                     10.52      0.00
 n1854                     12.40      0.00
 Propagated:
 U2268/ZN                   0.21      0.00
 Total:                     0.21      0.04  POSITIVE
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top