Basically, you do temperature analysis. so that u can veify whether you are getting the correct reference voltage across temperature variation with specified correction
1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.
1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.
1. DC analysis to see that all devices are in reespective region and that you have the required voltage at the ouptut.
2.DC temperature sweep to make sure you have the right ouput voltage varation with temperature.
3.Ac analysis on the loop. Make sure negative feedback is more than the positive feedback.
4.Run a transient analysis to make sure of the startup.
5. PSRR
6. Line regulation.