What's the rule of thumb for inductance on PCB trace

[gidimiz]

pcb inductance

Hi,

Have a look at this, maybe you will find the answer there:
**broken link removed**

Good luck.

 

[House_Cat]

trace inductance

There really isn't a 'rule of thumb' because the inductance depends on the return path position relative to the trace.

Take a look at the following for a good, simple explanation:

http://www.sigcon.com/Pubs/news/3_8.htm

 

[sergio mariotti]

inductance of pcb trace

As a rule of thumb a strip have an inductance of 1nH/mm.
Inductance is mainly dependent on wire lenght and less dependent on width and height.