Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Whats the main disadvantage of crosspolarization?

Status
Not open for further replies.

markus

Junior Member level 1
Junior Member level 1
Joined
May 26, 2004
Messages
16
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
191
Crosspolarization

Hello!

I'm wondering what's the main disadvantage of crosspolarization? Will it cause lose in transmitted or recieved power and how does this depend on crosspolarization?

Thanks for advance,
Markus
 

Re: Crosspolarization

This condition will reduce the signal received by about 20 dB in most cases. This effect is used to advantage in some systems. For instance in point to point microwave links there can be two completely independent signals on each of the polarizations. This will double the transmission capability.
 

Re: Crosspolarization

From the communication pont of view, the answer of flatulent is exaustive.
But from antenna theory point of view, To obtain nearly perfect pencil lobe, a very low xpol. is a must.
As the Co.pol is got dirty by Xpol, as the main beam became deformed.
 

Crosspolarization

it will affect the mainradiation and make energy loss
 

Re: Crosspolarization

It is used successfully in satellite communications. You have two signals at the same frequency, one is right hand circular polarized and the other is left hand circular polarized. The receiver antenna is able to seperate the two signals with about 25 dB of isolation.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top