Dear all, I am trying to use encounter to generate a digital block, but I didn't know how to define the pin file because there are many pins, someone tell me that I can
make a floorplan in virtuoso, then streamout the fp in ascii format which will contains all the pin/boundary info, and wirte a script to convert the ascii file to encounter pin file format, and then import the file into encounter, this will be ok, anyone can give me some advise about this?
I dont think you can do the floorplan in virtuoso & import it in Encounter. Why dont you do the pin placement manually & then write out the IO definition file. I know manual pin placement will be tough if your design has more pins.
I talked to some of my friends regarding the same, they also said that pin placement needs to be done manually. There are 2 ways.. Either you do it manually or write the IO file with pin placement details and load it in encounter shell.
I found another way: first, I use virtuoso-xl to generate a floorplan which contains the boundary/pins/test, (I thinks generate and place pin in vxl will more easy then in SE?), and then streamout the fp as a ascii file, and finally, i write a script to convert the fp file to iofile, and now, the file can work in encounter now.
We used to get it from the Architecture/design team.. i have never done any floorplan, so I dont know even what are all ways that we can do the floorplan..
Dear all, I am trying to use encounter to generate a digital block, but I didn't know how to define the pin file because there are many pins, someone tell me that I can
make a floorplan in virtuoso, then streamout the fp in ascii format which will contains all the pin/boundary info, and wirte a script to convert the ascii file to encounter pin file format, and then import the file into encounter, this will be ok, anyone can give me some advise about this?
Halo egg, I am having the same problem that you had. Have you found a simple solution for creating a floorplan in virtuoso and exporting to .fp format? I see that you wrote a script for converting the ASCII file to .fp, how did you do this? Could you write a generic script that can convert any floorplan or was it specific to the floorplan that you had to export?