bianchi77
Advanced Member level 4
- Joined
- Jun 11, 2009
- Messages
- 1,313
- Helped
- 21
- Reputation
- 44
- Reaction score
- 20
- Trophy points
- 1,318
- Location
- California
- Activity points
- 9,442
What should I fix with : "Could not power up debug port: Control/Status register ?
Guys,
I got error on reading STM32 :
What should I fix ? thanks
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
**JLink Warning: CPU not halted after Reset, halting using Halt request
***JLink Error: Could not power up debug port: Control/Status register reads 000000F0
Guys,
I got error on reading STM32 :
What should I fix ? thanks
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
**JLink Warning: CPU not halted after Reset, halting using Halt request
***JLink Error: Could not power up debug port: Control/Status register reads 000000F0