Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is Verification Plan and Test Plan.........?

Status
Not open for further replies.

kushagrak

Member level 2
Member level 2
Joined
Feb 27, 2008
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,507
Hi All,

can any body help me in understanding the difference between Verification Plan and Test Plan.........?


Thanks in Advance

KUSHAGRA
 

Basically there is no difference between these two ....... Both are refered to same thing.

Some people might say verification plan as overall SOC verification plan and test plan as tests written for how to verify each feature of SOC/ chip.

But both are for plan created for verification of a SOC/module.
 

    kushagrak

    Points: 2
    Helpful Answer Positive Rating
I am expecting some more answers.............can any one.......
 

Basically, they means the same thing. Just different word(Verification and test).

Verification Plan: It is generate by
-reading the spec
-extracting function
-extracting rule
-create "checker"
-create "functional coverage"
-...

You must list all things about verification. Let others know how you verify DUT. And after you verify, you can guarantee DUT is clear.
 

verification plan is the function point of DUT you want to verify , usually function coverage will do so!
 

will the verification plan same for every project or will it differs from one project to other......
 

Verification plan is written after reading the specs of design i.e what are the features ur design has and how are u going to verify those features.

Verification for different projects will be different assuming they have different functionality or features.

If they have some features same then u can use that part of verification plan to verify those features for both projects.
 

But I think Verification plan is for whole system verification and Test Plan is for specific tests just like FIFO , Registers , Path and all.we can say that testplans are subset of Verification plan
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top