What is the size of terminal connector

[Fan174]

i am working on my first pcb layout and had a question about drill sizes. I have Phoenix Connector and I want to use this connector on the PCB board

description link https://www.digikey.com/product-detail/en/phoenix-contact/1725656/277-1273-ND/267462

as given is 0.100" (2.54mm)

What size I should use on the board for making hole ?

 

[andre_luis]

As depicted on datasheet, pin dimensions are 0.5x0.9mm, whereas the recommended hole diameter (in fact not so clear) is 1.1mm.

 

[Fan174]

As depicted on datasheet, pin dimensions are 0.5x0.9mm, whereas the recommended hole diameter (in fact not so clear) is 1.1mm.

Okay so when I click on the symbol I get property window. Where to set hole diameter in window

 

[andre_luis]

The above snapshot refers to the positioning properties of the component (apparently on schematic viewer), does not get into the component details. To do so, you must edit it in the library editor.

By the way, doesn't it seem obvious to you that it would be useful to mention what CAD you are using?