You can get also big arc on low voltage, this is not problem, even with just one part.
:wink:
Big arc even several cm in length only with stronger transformer like for SMAW/REL welding (Arc Welding). Voltage can be 24V and in that case higher current is needed. Shape of that arc is different from this high voltage. Of course in your way this is not possible because you have weak transformer for that, but this can get with two-three-four car lead acid batteries in serie.
Of course this is complete different from your project but is possible.
:wink:
just take to 9 volts battery with their op poles connected together directly then slightly move one of the pole there will be a small spark of about a mm long
remember higher the voltage the current tends to take the least resistive that can also be your body which offers a mega ohm of resistance to current if you are all wet the arc may be set up near you in the case of 1 kV / mm watch really high power and if it is dc it may put an end to you
Fascination, taking the opportunity that I have recently started learning electronics and microcontrollers.i am curious to know why you are planning to set an electric arc up
is there then potentially lethal effects from over exposure to electric arc
No, my friend, bigger danger and lethal result have some fresh fruit from market full of pesticide. But certainly not healthy to expose body cells to ionized environment for longer period. Human bodz is very strong and its inert for many things, lots of consequences showsup later in older period of life.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?