Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Good response to current transients (during rapid charge/discharge
cycles when PLL is locking). Compare PLL settling times if a
X7R capacitor is used in a loop filter : slower settling than with
film..
Capacitance vs. Temperature change is small like C0G.
Piezo-electric effect is low : lower spurious due to vibration than
when using a ceramic capacitor.
Downside is that the film-capacitors are not quite as robust as
ceramic ones : melt easily if touched with a soldering iron !
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.