Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is a followpin in P&R?

Status
Not open for further replies.
T

triquent

Full Member level 3
Full Member level 3
Joined
Oct 13, 2004
Messages
166
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
1,826
what is followpin in the P&R? what is it used for?
 

what is followpin

followpin is used for the standcell, it support the std cell power. u can use srout to route only std cell in soc encounter.
 

soc encounter followpin

to send power to standard cells, followpins are used. in P&R, first followpins have to be placed on that standard cell placement will be done. then the standard cells will be hooked to power pads thru these followpins.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top