- Joined
- Jan 22, 2008
- Messages
- 53,108
- Helped
- 14,792
- Reputation
- 29,871
- Reaction score
- 14,291
- Trophy points
- 1,393
- Location
- Bochum, Germany
- Activity points
- 301,063
I'm not using Lenze drives, just keeping the manuals for reference. I don't have any special knowledge about it.
You'll need to work through the manual yourself.
These are vector drives with resolver feedback. The meaning of control signals strongly depends on the basic configuration setting in parameter C0005.
The explanation of all configuration parameters can be found in system manual paragraph 8.5 Code Table.
P.S.: I was assuming so far, that the drives are equipped with a keypad option. If not, parameters can be accessed through communication interfaces and setup software. I'm not familiar with the Lenze specific options.
You'll need to work through the manual yourself.
These are vector drives with resolver feedback. The meaning of control signals strongly depends on the basic configuration setting in parameter C0005.
The explanation of all configuration parameters can be found in system manual paragraph 8.5 Code Table.
P.S.: I was assuming so far, that the drives are equipped with a keypad option. If not, parameters can be accessed through communication interfaces and setup software. I'm not familiar with the Lenze specific options.
Last edited: