What does Q factor mean?

Status
Not open for further replies.
R

Rathohan

Newbie level 1
Joined
Mar 29, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,289
Well, during calculation, I found that Q factor can be either negative or positive?

Why? What do the negative Q and the positive Q mean?
 

Q=Quality Factor definition is generally used to define Energy Loss in inductors.Q factor is always positive before Self Resonance Frequency and beyond it may be negative and it doesn't make sense because Inductor wouldn't be "Inductor" anymore beyond Self Resonance Frequency...
 
In a very general sense, Q defines the ratio between energy stored to energy dissipated per radian (or per cycle*2pi). In other terms, it's also the magnitude of the ratio of imaginary impedance to real impedance (Q for passive components is always positive).

Q factor can also be used to describe more complex systems, but its exact meaning isn't quite the same...
 
There are previous threads about Q factor, e.g. https://www.edaboard.com/threads/128004/

It happens that the two definitions mentioned by mtwieg result in the same Q value. Both can be also extended to negative Q numbers and describe a resonant circuit with negative real impedance respectively an oscillation with increasing energy.
 
Ha all,

Negative Q means "Q beyond infinity" .

In a resonant circuit, negative Q can be obtained with negative resistance (and positive L and C), as pointed out.
Yet, negative Q could be obtained too with positive R and both L and C negative...

Now I propose a puzzle:
Suppose we have an RLC circuit (series or parallel), and that R, L and C are all negative.
Then Q is positive and the circuit is stable (the poles are in the left half-plane and the impulse response decreases with time).
Now we excite the circuit with a sinusoid at the resonant frequency. I.e., with a voltage source in the series circuit or a current source in the parallel circuit.
How and where is the energy dissipated?

Regards

Z
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…