gmamo
Newbie level 1
oscilloscope 9106
Hi,
A long time ago, my Wavetek 9016 dual trace oscilloscope became faulty, and I just put it aside and purchased a DSO instead.
I recently decided to have a look ate the Wavetek again to try to repair it, and found out that the only thing wrong with it is the Power Supply transformer.
I cannot find any schematic on the net.. neither of the Beckman 9106 which is a similar scope.
Any help with the secondary voltages of the main transformer appreceated.
I know there is a 0, 12, 24 volt out of the orange/black/orange wires out of the transformer.
What I don't know is the voltages from the red-red, and blue-blue, and white-grey-green.
Any help appreceated.. even if you know a source to purchase the transformer as a spare part.
Transformer details:
Yin Yan
RPT--3083I8
YN 88132
82.4.27
Thanks
Grg
Hi,
A long time ago, my Wavetek 9016 dual trace oscilloscope became faulty, and I just put it aside and purchased a DSO instead.
I recently decided to have a look ate the Wavetek again to try to repair it, and found out that the only thing wrong with it is the Power Supply transformer.
I cannot find any schematic on the net.. neither of the Beckman 9106 which is a similar scope.
Any help with the secondary voltages of the main transformer appreceated.
I know there is a 0, 12, 24 volt out of the orange/black/orange wires out of the transformer.
What I don't know is the voltages from the red-red, and blue-blue, and white-grey-green.
Any help appreceated.. even if you know a source to purchase the transformer as a spare part.
Transformer details:
Yin Yan
RPT--3083I8
YN 88132
82.4.27
Thanks
Grg