Aishwarya1 Jain
Newbie level 1
- Joined
- Mar 29, 2015
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Location
- Manipal, India
- Activity points
- 9
Dear sir,
The required symbols cc1101 and 4pin header give me this kind of warning when i try to netlist.The footprints are perfectly fine.the result of this warning is tht they are not able to load these symbols on the required pcb board when i try to place them manually.
#1 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'CC1101' for device 'CC1101_CC1101_CC1101' not found in PSMPATH or must be "dbdoctor"ed.
#2 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '6PIN' for device '6PINCONN_2_6PIN_6PINCONN' not found in PSMPATH or must be "dbdoctor"ed.
Database has a non-recoverable corruption. Contact Cadence customer support.
The required symbols cc1101 and 4pin header give me this kind of warning when i try to netlist.The footprints are perfectly fine.the result of this warning is tht they are not able to load these symbols on the required pcb board when i try to place them manually.
#1 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'CC1101' for device 'CC1101_CC1101_CC1101' not found in PSMPATH or must be "dbdoctor"ed.
#2 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '6PIN' for device '6PINCONN_2_6PIN_6PINCONN' not found in PSMPATH or must be "dbdoctor"ed.
Database has a non-recoverable corruption. Contact Cadence customer support.