jay_3189
Banned
- Joined
- Sep 19, 2013
- Messages
- 104
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 16
- Location
- Ahmedabad
- Activity points
- 0
I want to control a 6 solenoid valves(Operates at 24DCV and 0.5A) with the use of 6 relays connected to an Arduino's 6 pins via 6 BJT(NPN) Transistor.
The Arduino output pin is 5V and can source 40mA maximum.
I would like to use a relay to switch the valve on and off.
So, suggest me that which transistor is better to use here and value of resistor that I have to put between arduino and transistor.
and DC voltage for relay to operate.
The Arduino output pin is 5V and can source 40mA maximum.
I would like to use a relay to switch the valve on and off.
So, suggest me that which transistor is better to use here and value of resistor that I have to put between arduino and transistor.
and DC voltage for relay to operate.