Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

want microblaze sample project

Status
Not open for further replies.

BuBEE

Full Member level 2
Full Member level 2
Joined
Jul 23, 2005
Messages
132
Helped
12
Reputation
24
Reaction score
7
Trophy points
1,298
Location
Thailand
Activity points
2,049
microblaze sample project

Now i'm just start lerning with microblaze but i can't understand with user guide

pls. let's me see basic project from you.

thanks. and regards
BuBEE
 

Learning Microblaze is good


But i dont think that u can learn for a sample project.....
to run any sample project u need the tools for conpilings and simulating the programs...

if u want to really learn it to the core ... there s no way around than reading the
spec...... limit ur reading to the following asa a first step

* the features of microblaze
* the core architecture
* the functionalily of each blocks
* the Assembly instruction class and learn some important set on inst in weach category

if decide to use C then u need some tools to compile ur code and u need a hardware or u can use a simulator ...... these tools are epensive .


learn the theory first


-helios
 

    BuBEE

    Points: 2
    Helpful Answer Positive Rating
Learning Microblaze is good


But i dont think that u can learn for a sample project.....
to run any sample project u need the tools for conpilings and simulating the programs...

if u want to really learn it to the core ... there s no way around than reading the
spec...... limit ur reading to the following asa a first step

* the features of microblaze
* the core architecture
* the functionalily of each blocks
* the Assembly instruction class and learn some important set on inst in weach category

if decide to use C then u need some tools to compile ur code and u need a hardware or u can use a simulator ...... these tools are epensive .


learn the theory first


-helios

MicroBlaze Toolchain for Linux Platform can be downloaded from this link.
**broken link removed**
 

    BuBEE

    Points: 2
    Helpful Answer Positive Rating
on the xilinx site, there are available some microblaze projects. i downloaded a calculator project, with ps/2 keyboard and vga. i have doing a homework, in the same theme, and it helped. try there!
 

    BuBEE

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top