Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Voltage regulator for inverters VCC=3.3 VSS=1.65 and VCC=1.6

Status
Not open for further replies.
V

vovan76

Junior Member level 3
Junior Member level 3
Joined
Aug 19, 2009
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,484
Hi
I’m going to design voltage regulator (LVR) for 2 inverters chains
First chain
VCC=3.3 VSS=1.65
Second
VCC=1.65 VSS=0
I think it should be some kind of push - pull LVR which can supply current and receive current.
Do anybody has experience with this kind of LVR or can refer me to relevant papers

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top