Voltage drop in LM2931AZ-5.

Status
Not open for further replies.
A

amayilsamy

Advanced Member level 1
Joined
Feb 5, 2013
Messages
420
Helped
38
Reputation
76
Reaction score
34
Trophy points
1,308
Location
Chennai,India
Activity points
3,370
I'm using the Voltage regulator LM2391.

All are three different circuit. And maximum Load current is 40 mA.

First regulator output voltage is 4.85 V

Second regulator voltage regulator 4.91 V

Third regulator voltage regulator 5.01 V

Why is this different in LM2931AZ-5..

View attachment LM2931.bmp
 

The differences are mainly variation from part to part with a very small part of the difference being temperature, and measurement accuracy. The LM2931AZ-5 data sheet says the output voltage range is 4.75V to 5.25V when measure at 10ma. Your 3 parts meet the specification with margin. There are LDOs with tighter output levels.
 

Its . Other voltage regulators working 5.01 V like LM7805. I'm using this for ADC that what the problem.

How to manage this?
 

I don't understand what you're problem is,as explained by @HMS1021, your o/p voltage is within the margin.

Are you saying you want to have o/p of 3 voltage regulators that you have at 5.01 Vso that your ADC sees no margin ???.Can you explain a bit on how you're trying to use ADC ???
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…