Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

vocal cord signal detection for dump patient

Status
Not open for further replies.

kumaresh8055

Newbie level 1
Newbie level 1
Joined
Jan 17, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi,iam doing my UG project, i need to pickup vocal cord signal or voice signal, so that i interface and predict what the user is trying to say without he speaks. plz help me out
 

Many years ago in the UK there were lots of "throat microphones" about, left over from the second world war. These were used by tank crews and were a pair of microphones mounted on a flexible tape that went snugglely around the users neck. This was so they picked up the vibrations from the voice box direct and not from the air around the users mouth, because this would have picked up a lot of noise as well. Try this out or buy some throat mics.
Frank
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top