steph6
Newbie level 1
- Joined
- Jul 3, 2015
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 8
Hello,
I created a layout of a not gate using Virtuoso Cadence layout tool. Then I did the drc check and fixed all errors and I extracted the layout. After that I went into the extracted layout to try to post simulate it using ADE L (Spectre) after setting up the Analysis and the outputs and the stimulus.
However I am getting this error:
"ADE-3036: Error Encountered during simulation".
I have attached the pic of the error.
I am new to the whole subject so if I didn't give enough info then please do ask me.
Thanks a lot for your help.
Regards,
Steph
I created a layout of a not gate using Virtuoso Cadence layout tool. Then I did the drc check and fixed all errors and I extracted the layout. After that I went into the extracted layout to try to post simulate it using ADE L (Spectre) after setting up the Analysis and the outputs and the stimulus.
However I am getting this error:
"ADE-3036: Error Encountered during simulation".
I have attached the pic of the error.
I am new to the whole subject so if I didn't give enough info then please do ask me.
Thanks a lot for your help.
Regards,
Steph