Virtuoso IC6.16 - DC simulation - Annotate DC OP failed

Status
Not open for further replies.
C

Chr's

Junior Member level 1
Joined
Sep 26, 2014
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
121
Hi everyone,

My issue is about a DC simulation.

When this one is finished, and I wanted annotate the DC operating points on the schematic, They are not displayed for all components.


For example, I've 2 dc sources, but the DC operating point is displayed only for one of them. I save all the points (Output -> Save all -> check boxes on "all").

If someone has the solution, thanks in advance.


Regards,
 

Hi

Sometimes Cadence is a little bit tricky at some point when using save all .

Could you make sure that you save individually the nets you are interested in (outputs>to be saved>select on shcematic)?
 

chris.mourad said:
Hi

Sometimes Cadence is a little bit tricky at some point when using save all .

Could you make sure that you save individually the nets you are interested in (outputs>to be saved>select on shcematic)?
Click to expand...


It's big schematic and I cannot select all the points, that's why select: save point "all"with a check box
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…