Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Virtex 6 feature of Xilinx

Status
Not open for further replies.
S

sun_ray

Advanced Member level 3
Advanced Member level 3
Joined
Oct 3, 2011
Messages
772
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
6,828
What is the unique feature in Virtex 6 of Xilinx FPGA that Virtex 5 or Virtex 4 do not have?
 

barry had a valid response. Just read the datasheet/overview of each part to see the differences. I'm not going to download them to look for you.
 
  • Like
Reactions: barry

    barry

    barry

    Points: 2
    Helpful Answer Positive Rating
V5 vs V4:
* Fabric is now LUT6 based vs LUT4 based. FF's have set/reset lines.
* PLL and DCM vs just DCM
* DSP48 now has 25x17 multiplier option and built in comparator.

V6 vs V5:
* Fabric now has 8 FF's per slice, but have only set or reset but not both.
* PLL/DCM replaced by MMCM.
* DSP48 now has pre-adder option
* transceivers are now 6Gbps capable.

The V6 has faster logic and more logic overall. These are the main differences.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top