Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

video through microcontroller

Status
Not open for further replies.

khurram

Newbie level 6
Newbie level 6
Joined
Apr 20, 2004
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
110
hi,
i have some projects in those i have generate video through Microcontroller PIC16f877 || pic 16f84 || at89c55 || AVR90S8515.

data flow:

serial --> microcontroller --> Video

specs,
video display 16x16 matix
ascii characters 32 - 127

usage,
Send from serial 9600,8n1
(x,y,character) where 0<x<15,
0<y<15,
32 < character <127
charater will be displayed on the tv at x,y location

can any one help me
 

hi
what do you want to do with microcontroller ,generating video or processing any input video signal?
 

check at the Cornell University's embedded course page.
 

You can search the web for that and also try www.piclist.com. Never the less most MCU are to slow to generate video signal (wth pic the best you can do is a B/W low resolution signal). AVR mcu are a bit faster try www.avrfreaks.com). If you like PIC based mcu try scenix mcu, they are similar to pic but runs up to 100 MHz ( www.ubicom.com ).
I hope this helps you.
 

Your video data is captured via serial port?
 

are U using P2P? or with RTOS?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top