VGA connector footprint needed

Status
Not open for further replies.
H

HOSSEINGHODS

Newbie level 3
Joined
Sep 27, 2016
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
28
I found this post but I did not find anything on attachment. Could anyone please upload VGA connector footprint for Altuim?
 

I think that your more likely to get one if you identify which one.
Vertical, right angle, male, female, make & model ????

ISTR that they are not all exactly the same, one manufacturers does not always fit anothers.
 
Hi,

you are slow with informations:

IAre you talking about a "high density 15 pin d-sub"?

I think it´s not asking too much:
Maybe you could give additional informations: THM, SMD, low profile..

You should have already done the research on this connector.
The problem will be: If you now choose a footprint for a connector, but it is not available.... or too expensive.
Therefore I recommend to first look for available and suitable connectors, the manufacturer name, the datasheet, the exact part number...and then ask for the Altium file.

Klaus
 
Look up the connector data sheet and mechanical details and learn how to do the footprint yourself, this is the very first thing you should master using a ECAD system if you plan on doing design work properly, it is learning how to create the basic building blocks of a PCB.
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…