Binome
Full Member level 3
- Joined
- Nov 16, 2009
- Messages
- 153
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,298
- Location
- Lyon, France
- Activity points
- 2,412
Hi,
I've downloaded an ISE project with a testbench included. As there are Xilinx ipcores to simulate I had to compile libraries first. I compiled it and when trying to run the simulation is:
ERROR: Simulator version mismatch!
The simulation libraries were compiled for the 'QUESTASIM 10.2c' version, but
the selected simulator is 'QUESTASIM 2013.07'. Please recompile the libraries for
the selected simulator version or change the simulator selection.
The problem is the versions available in my company are: questasim 10.2c and ise 14_7.
Is there a way to simulate?
I've downloaded an ISE project with a testbench included. As there are Xilinx ipcores to simulate I had to compile libraries first. I compiled it and when trying to run the simulation is:
ERROR: Simulator version mismatch!
The simulation libraries were compiled for the 'QUESTASIM 10.2c' version, but
the selected simulator is 'QUESTASIM 2013.07'. Please recompile the libraries for
the selected simulator version or change the simulator selection.
The problem is the versions available in my company are: questasim 10.2c and ise 14_7.
Is there a way to simulate?