vickyuet
Member level 2
- Joined
- Oct 3, 2006
- Messages
- 50
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- pakistan
- Activity points
- 1,691
Dear All,
I had written verilog HDL behavioral code for 4 bit 2x1 mux but my requirement is that i want a generalized code so that i can call it from top level module based upon width of my data.
I want that mux code to behave as 4-bit wide 2X1 mux or on requirement 8-bit wide 2x1 mux as well in same design.Any suggestion how can i adjust this bit width problem in verilog.One way is to call that 4-bit wide 2x1 mux twice to get functionality of 8-bit wide 2x1 mux but i do not want that.Actually my requirement in a design is to use 4 bit 2X1 mux as well as 8-bit 2X1 mux that i intend 2 implement from a general n-bit 2x1 mux.
regards
I had written verilog HDL behavioral code for 4 bit 2x1 mux but my requirement is that i want a generalized code so that i can call it from top level module based upon width of my data.
I want that mux code to behave as 4-bit wide 2X1 mux or on requirement 8-bit wide 2x1 mux as well in same design.Any suggestion how can i adjust this bit width problem in verilog.One way is to call that 4-bit wide 2x1 mux twice to get functionality of 8-bit wide 2x1 mux but i do not want that.Actually my requirement in a design is to use 4 bit 2X1 mux as well as 8-bit 2X1 mux that i intend 2 implement from a general n-bit 2x1 mux.
regards