garimella
Full Member level 5
- Joined
- Aug 25, 2011
- Messages
- 268
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Activity points
- 3,361
I am trying to use AD650 as V-F converter for the input range(0-10V) and output 0-100KHz
Used Rin =102K, CINT = 1nF and Cos = 100pF, these values are based on online design calculator from AD
When I wired on board, then Iam getting 90KHz for 9V and 10V, the frequency saturates at 9V. Now I tried medelling with Rin and for any set value of Rin, the output frequency does not change between 9V and 10V. Why this is so?
SOS.
Used Rin =102K, CINT = 1nF and Cos = 100pF, these values are based on online design calculator from AD
When I wired on board, then Iam getting 90KHz for 9V and 10V, the frequency saturates at 9V. Now I tried medelling with Rin and for any set value of Rin, the output frequency does not change between 9V and 10V. Why this is so?
SOS.