Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

using zigbee with Max3223

Status
Not open for further replies.
S

saurabh17g

Member level 2
Member level 2
Joined
Mar 30, 2010
Messages
49
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Bombay
Activity points
1,707
Hello,
I was previously using LM1117 interface for interfacing. I was using Max 232 to get data from PC to microcontroller and interfaced lm1117 between microcontroller and zigbee connection. So, if i use Max3223 (and connect tx,rx and ground of PC)and Zigbee module directly, will i be able to do it? or there are some additonal connections to be done to interface PC with zigbee directly?
 

saurabh17g said:
Hello,
I was previously using LM1117 interface for interfacing. I was using Max 232 to get data from PC to microcontroller and interfaced lm1117 between microcontroller and zigbee connection. So, if i use Max3223 (and connect tx,rx and ground of PC)and Zigbee module directly, will i be able to do it? or there are some additonal connections to be done to interface PC with zigbee directly?
Click to expand...

No need of any additional circuit

Nandhu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top