Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Using Viabars

Status
Not open for further replies.

big_fudge98

Member level 2
Member level 2
Joined
Mar 31, 2019
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
445
Hi all,

I am using a 90 nm SiGe process from GlobalFoundries. I noticed that the PDK provides 'Viabar'. This is basically a continuous wall, made of via layer, and not discrete vias.

However, I have never seen them being used before. So, my question is, are there any considerations that I should keep in mind while using viabars? Or would it be okay, as long as I pass DRC?

Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top