Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

using NCT1008 temp. monitor with 8051

Status
Not open for further replies.
R

raghavkmr

Junior Member level 2
Junior Member level 2
Joined
Nov 26, 2013
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
194
Hi,
I am using NCT1008 ic for temperature monitoring
Has anyone tried it with 8051
I am using bit banging for I2c protocol

How to write in registers of this chip using 8051.



Regards
Sameer
 

Hi,

May I ask why you don´t want to use a single chip solution like LM73?

********
I2C is a standard interface. Thus there are many software solutions (bit bang) available.
The usage of the registers is written in the datasheet.
What else do you need? (I see nothing special)

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top