Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using Inhand ELF with Platform Builder 4.0 ?

Status
Not open for further replies.
S

STOYANOV

Member level 1
Member level 1
Joined
Jan 26, 2002
Messages
40
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,288
Location
Sofia, Bulgaria
Activity points
328
StrongARM 11.00 question

HI all,

I have an INHAND's ELF board based on StrongARM 1100. Inhand specifies, that Microsoft Builder 3.0 for WinCE3.0 must be used with this board, but I have Platform Builder 4.0.
Anybody using Inhand ELF with Platform Builder 4.0 ? Problems ? Or any advise ? Is Microsoft Platform Builder 3.0 stiil aviable somewhere ? Even my 4.0 is old :))

Thanks,

STO
 

Hi,

If you have BSP/Board Support Package in source not library/ for this board, try to build your own wince image. Platform Builder 4.0 has good help for migration from wince 3.0 to wince 4.0.


Good luck!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top