Using H-Bridge instead of L293 or L298 for control of DC brush motor

Status
Not open for further replies.
S

snmeciut

Member level 4
Joined
Nov 30, 2002
Messages
71
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
348
Dear

I saw that usually l293 or l298 was used for control of the dc brush motor.but i used l298 and saw that dissipation of this IC is high,so IC is warmed high.

I think that a simple H-Bridge with IRF9540 and IRF530 with low resistance and dissipation is powerfull than these IC's.

please send your comment
 

h bridge irf 530

Hi,

IR 2110 is Good for H - Bridge Control.

Regards
Rahul :wink:
 

h bridge irf530

I've used the l298... is really a headache, it keeps burning and the pins break when u are most frudtrated.

If you can use other IC i think you should!!!
 

irf530 h bridge pwm

I second the IR2110.

Also take a look at the Unitrode motor control ICs here (Unitrode is now a part of Texas Instruments)

Select the parts based on your specifications
**broken link removed**

Best regards,
v_c
 

motor dc irf530

you must match your motor specification with l293, i am able to controll 2 motor using this IC
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…