Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Using external PCI-to-ISA bridge in subtractive decode mode

Status
Not open for further replies.

lsa1961

Junior Member level 2
Junior Member level 2
Joined
Feb 21, 2002
Messages
22
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
93
Does anyone have experience of using a external PCI-to-ISA bridge (PC87200, IT8888F etc.) in subtractive decode mode?
In my design this bridge is mounted on the separate board which is connected to the PCI slot.
Can I get normal behavior of the external bridge using only PCI bus signals (without motherboard's signal NOGO)?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top