Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using a network processor by Freescale MPC885 with Linux

Status
Not open for further replies.
D

defer

Junior Member level 2
Junior Member level 2
Joined
Feb 27, 2002
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Italy
Activity points
207
MPC885

Hi

I want to build a systems with two hardware interfaces:
1. Fast Etherent
2. UTOPIA L2

The system recive data by UTOPIA, it's make some elaborations and transmit data by Etherent. For this reason I'm thinking to use a network processor by Freescale MPC885 with O.S. Linux.
Someone already has made something of similar and can give me any suggestions?

Thx Defer
 

MPC885

MPC885 is suite for your need.
You can use FEC as the Ethernet Port and ATM port use UTOPIA interface.

And Linux just have these driver for these kind of component.
 

Re: MPC885

What Linux linux distribution ?
With the developer board the freescale use the ARABELLA Linux but this version don't have atm derivers.

Thx
Defer
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top